The Faroudja VP400A Video Processor is a precision video instrument used to convert NTSC Composite, Y\/C, or 525 line RGB or Component interlaced signals into 1050 line progressive outputs.
\nUsing the VP400A Video Processor will produce
\npictures with more details, remove unwanted picture
\nartifacts and, when used with projection systems,
\nproduce pictures of exceptional quality, giving a
\ncinema-like feeling.
\nFront panel features include Power, Input Select
\n(Video, Y\/C, RGB and Component), Brightness,
\nContrast, Color, Auto-Tint, Noise Reduction, Detail,
\nDigital Filter and Freeze. Input switch settings are
\nmemorized when the power is removed from the
\nunit. This allows the VP400A to be interfaced into a
\nsystem without the need to select the input when
\nthe system is powered up. The remaining controls
\nmay be left in factory preset or manually set by
\npulling out and rotating the control until the desired
\nlevel is established.
\nInputs to the VP400A include: Composite Video,
\nY\/C (S-VHS), RGB and Component (Y,R-Y,B-Y). The
\nVideo input may be connected by either a BNC connection
\nor a video RCA type connection. These
\ninputs are looped internally so that the signal may
\nbe used by other devices. A selectable 75 Ohm terminator
\nswitch is provided and should be in the ON
\nposition if the input loop is not used. The Y\/C input
\nuses a standard 4 pin S-VHS connector. This input
\nis not available for a looped operation and is terminated
\ninternally. The RGB and Component inputs
\nuse BNC connectors. As with the video input, these
\ninputs are loopable to other devices. Selectable 75
\nOhm terminations are provided. If the looped inputs
\nare used, these cables should be kept short, (under
\n6′ in length) or a video distribution amplifier should
\nbe used. This allows the VP400A to keep the highest
\nsignal bandwidth possible without having the
\nhigh frequency being attenuated in a long cable.
\nOutput from the VP400A is provided on six BNC
\nconnectors as well as one 15 pin D™ connector. The
\nBNC outputs provided are Red, Green, Blue,
\nHorizontal Sync, Vertical Sync and Composite Sync.
\nInterface to monitors\/projectors can be of a 4 or 5
\nwire connection. Note: 4 wire, meaning Red, Green,
\nBlue and Composite Sync or 5 wire, meaning Red,
\nGreen, Blue, Horizontal Sync and Vertical Sync.
\nThere is no sync present on the Green output. The
\nVP400A is capable of driving a monitor\/projector
\nusing the BNC outputs as well as a 15 pin ™ connector,
\nat the same time. The monitor and projector
\nhave to scan at 62.94KHz Horizontal scan rate.
\nThe VP400A features a RS-232 remote control
\ninterface that will allow control of all line quadrupler
\nfunctions. The remote control uses a 25 pin female
\n™ connector located on the rear panel.<\/p>\n","protected":false},"excerpt":{"rendered":"
The Faroudja VP400A Video Processor is a precision video instrument used to convert NTSC Composite, Y\/C, or 525 line RGB or Component interlaced signals into 1050 line progressive outputs. Using the VP400A Video Processor will produce pictures with more details, remove unwanted picture artifacts and, when used with projection systems, produce pictures of exceptional quality, […]<\/p>\n","protected":false},"featured_media":271,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_cat":[21],"product_tag":[],"class_list":["post-270","product","type-product","status-publish","has-post-thumbnail","hentry","product_cat-used-equipment"],"_links":{"self":[{"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/product\/270","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/media\/271"}],"wp:attachment":[{"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/media?parent=270"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/product_cat?post=270"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/dev.americanhifi.com\/wp2018\/wp-json\/wp\/v2\/product_tag?post=270"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}